What does an irrigation technician need to be able to do on day one?
On day one, an irrigation technician needs to be able to install with their hands and troubleshoot with their head. That means workmanship, a methodical approach to faults, and the discipline to make the site safe before the shovel comes out.
On installation days, that means laying and fitting pipe, setting heads to grade, wiring and programming controllers, and backfilling and cleaning up a site the way a lead tech would.
On service days, it means running zones, finding the fault before digging, and repairing without guessing. A zone that will not come on can be the controller program, the wiring, the solenoid or the valve, and a good tech works through them in order instead of replacing parts.
Manufacturers publish the reference numbers for that work. Rain Bird's multimeter guide, for example, treats a solenoid reading between 20 and 60 ohms as good, with a lower reading pointing to a short and a higher one to reduced current flow. That is one maker's guidance, but it shows the standard you are screening for: a tech who measures and confirms rather than replaces and hopes.
The safety side is where irrigation differs from a mowing crew, and it is the part to train before the first trench. OSHA requires employers to determine the estimated location of underground utilities before opening an excavation.
811 is the free national call-before-you-dig service, and anyone planning to dig should contact 811 or their state 811 center a few business days in advance so buried utilities get marked with paint or flags. 811's own guidance is that every digging project requires contact, regardless of depth, because some utilities sit just inches down.
Trenching carries its own OSHA lines. Workers in excavations must be protected from cave-ins by a protective system unless the excavation is in stable rock or is under 5 feet deep with no sign of cave-in found by a competent person. A trench 4 feet or deeper also needs a ladder, stairway or ramp within 25 feet of lateral travel.
A new tech should learn those two lines from your safety program, not from a crew member's shorthand. For the worker's view of the job itself, our career guide describes what an irrigation technician does across installs, service calls and seasonal work.
Looking to hire? Post your irrigation technician role on LandscapingHires and reach people who already work in landscaping, lawn care and tree care.
Post an Irrigation Technician Job →Where do landscape companies find irrigation technicians?
Landscape companies find irrigation technicians first inside their own crews. A crew member who already knows your properties, your customers and your standards is the easiest first look, and irrigation skills can be trained in house on real service calls under a lead tech.
Then work the adjacent trades as a bridge. Irrigation sits close to plumbing: the Irrigation Association's state licensing guide lists California, Connecticut, Oregon, Illinois and Rhode Island as states where irrigation contracting is a subcategory license under plumbing or landscape contracting, so plumbing helpers and techs are worth a call. Golf courses and sports turf operations are another channel to work: BLS OEWS counted 91,890 landscaping and groundskeeping workers in May 2025 in the amusement and recreation industries that include golf courses and country clubs.
The wider market is not one you can read under an irrigation technician title. BLS notes that some landscaping workers help install lighting or sprinkler systems, and BLS has no separate occupation code for irrigation technicians.
What the data does show is how much hiring the broader workforce absorbs: BLS's Employment Projections put openings for landscaping and groundskeeping workers at 149,500 a year on average over 2025-35, a count that includes the self-employed.
Recruit in the languages your market speaks. In BLS's Current Population Survey, women were 7.9% and Hispanic or Latino workers 47.5% of the 1.114 million landscaping and groundskeeping workers. An ad that runs only in English misses people already doing this work.
Beyond your own network, post where landscaping people already look. The cross-role guides on hiring and running a landscaping company cover recruiting channels, job ads, seasonal hiring calendars and the H-2B seasonal program, which runs on its own federal timeline with prevailing-wage and recruitment requirements of its own.
What should you pay an irrigation technician?
Pay an irrigation technician against your local market, using the closest available proxy as a reference: landscaping and groundskeeping workers (SOC 37-3011). BLS has no separate occupation code for irrigation technicians, so its wage tables carry no wage under the title.
In BLS OEWS May 2025, that occupation showed a national median of $18.82/hour ($39,150/year) and a mean of $20.33/hour, with the 10th percentile at $14.98/hour and the 90th at $27.28/hour, across 952,640 wage-and-salary jobs, all industries.
Two limits sit on that benchmark. OEWS pay is straight-time: base rate, commissions, production bonuses, incentive pay and tips are inside the number, and overtime pay is excluded. And OEWS counts wage-and-salary employees only, so the self-employed and owners in unincorporated firms are not in it.
Treat the figures as national references, not offers. Your actual range is set by your market: what irrigation and landscape competitors in your area post, what your service mix requires, and how much work a tech can carry alone.
Post the range in the ad, and keep it current on the irrigation technician jobs page. If a tech earns bonuses on top of hourly pay, spell out in writing what earns them and when they settle.
How do you screen and test irrigation technician candidates?
Screen and test irrigation technician candidates in three passes: a phone screen for schedule and reliability, a working ride-along on real service calls for skill, and references for how the candidate actually behaved on a crew.
The phone screen covers what resumes hide: whether the season's schedule and early starts work, whether they can drive your trucks, and what their last two jobs actually ended over.
Run the ride-along on a real service day, and pay for it. The Department of Labor's hours-worked rule names employees: travel from a required meeting place, such as the shop where crews pick up tools, to the work counts as part of an employee's day. Our research found no DOL guidance on candidates specifically, so pay for the whole block and confirm how your ride-alongs are treated with the Wage and Hour Division.
Watch the basics on the ride-along:
- The locate comes before the dig, every time, with 811 contacted before the shovel moves.
- Trench discipline: no one enters an unprotected trench, and the newest person is never the one deciding.
- Troubleshooting is narrated, not guessed: controller program first, then wiring and solenoid, then the valve.
- Fittings are clean, heads are set to grade, and the site is backfilled and cleaned before leaving.
- Damage, wet spots and misses get flagged to the office instead of smoothed over.
For a service tech, hand them a controller with a stuck zone and ask them to talk through it. You are listening for a sequence, not a single answer.
Minors on an irrigation crew are a real limit, not a formality. The FLSA sets a general minimum age of 16 for non-farm work and 18 for occupations DOL declares hazardous. Hazardous Occupations Order 7 bars workers under 18 from operating or riding on power-driven hoisting equipment, including skid-steers and backhoes. Hazardous Occupations Order 17 bars 16- and 17-year-olds from trench work, except manual digging or a trench no deeper than 4 feet. Summer help aged 16 or 17 can hand-dig and hand-backfill within the 4-foot line; the mini-ex and any deeper trench stay with adult crews.
If you order driving-record or background reports through a background-check company, the Fair Credit Reporting Act applies. That means a stand-alone written notice, and before you reject someone over a report, a pre-adverse-action notice with a copy of the report and a summary of rights. After an adverse action, you give the reason, the reporting company's contact details, and the candidate's right to dispute the report and get a free report within 60 days.
Score every candidate on the same sheet, and make the offer decision the same day, while the service calls are fresh.
What licenses or certifications should an irrigation technician hold?
An irrigation technician should hold the license your state requires for the work, which varies state by state, and the first check is your state's own rule, not a certification and not a guess.
The Irrigation Association's state licensing guide lists four states that require an irrigation-specific contracting license for landscape irrigation work: Louisiana, New Jersey, North Carolina and Texas. The same guide lists California, Connecticut, Oregon, Illinois and Rhode Island as requiring a license that is not solely irrigation-specific but governs irrigation contracting, and Florida as offering a voluntary state license that exempts holders from local irrigation contracting licenses. The guide is the association's own summary, so confirm your state's rule with the agency that licenses irrigation or plumbing work.
Texas shows what a verification looks like. TCEQ issues three landscape irrigation occupational licenses: Landscape Irrigator, Irrigation Technician and Irrigation Inspector, under its administrative rules. In Texas, no one may sell, design, install, maintain, alter, repair, service or inspect an irrigation system (or consult on these activities) without a TCEQ license. An Irrigation Technician connecting a system to a water supply, including installing a backflow prevention device, must work under a licensed Landscape Irrigator's supervision. If you hire in Texas, verify the supervising irrigator as well as the tech.
The other named states draw their own lines. New Jersey requires a business doing landscape irrigation work to hold a business permit, which requires employing a Certified Landscape Irrigation Contractor certified by the state's Board of Landscape Irrigation Contractors. South Dakota's State Plumbing Commission licenses underground irrigation contractors and installers.
Backflow is where irrigation hiring gets sharp edges. In Massachusetts, backflow prevention devices other than fire-protection ones must be installed and repaired by a Massachusetts licensed plumber, so an irrigation crew's scope there stops short of that work. In Illinois, backflow testers, called Cross-Connection Control Device Inspectors, must be authorized to perform plumbing under the Illinois Plumbing License Law before they can be approved. Before you write backflow work into a tech's route, check who may install, repair and test devices where you work. The state's rules and the water supplier's program both reach the answer.
Our state-by-state guide to irrigation license requirements covers which states license irrigation techs and contractors, and our backflow tester certification guide covers the tester credential.
Voluntary certifications sit in a different bucket. The Irrigation Association's landscape-side certifications include CIT (Certified Irrigation Technician), CIC (contractor), CLIA and CGIA (auditors) and CID (designer). The IA describes CIT holders as entry-level field professionals who install, repair and/or maintain systems. Its program recommends at least six months of irrigation field experience, or a set number of field hours (an IA recommendation, not a requirement), and gives candidates one year from application to complete the program. The association states that its classes are not required for its certifications. Certification holders keep the credential current with 20 CEUs every two years, including at least 10 irrigation-specific and 5 Tier 1 water-efficient CEUs, under the IA's 2026 structure.
None of that is a license. A certification is your company's preference, a way to set a tech's scope, and a training target. Treat it that way in the ad, and pay for the step when it helps you keep the tech.
The vehicle question has its own weight lines. FMCSA's commercial motor vehicle rules, including the DOT medical card, start at 10,001 lb GVWR or GCWR in interstate commerce, far below the CDL thresholds. A Class A CDL attaches to combinations at 26,001 lb GCWR or more with a towed unit rated over 10,000 lb, and a Class B CDL to a single vehicle rated at 26,001 lb GVWR or more. Below those weight lines the Class A and Class B thresholds do not apply; your insurer and your own fleet policy can still set a higher standard for drivers.
Before you send a tech out, confirm the current requirements with the agency that licenses irrigation or plumbing work in your state, and with the water supplier on backflow. Rules change, and who may install, repair and test a backflow device is a state and water-system question, not a national one.
How do you keep irrigation technicians once hired?
You keep irrigation technicians once hired by keeping the work steady, the training going somewhere, and the trench from ever becoming a judgment call.
Give the job a ladder: installation help first, then solo service calls, then lead tech on installs, with certification support at the step where it helps. An IA credential such as the CIT gives the ladder a visible rung, and its CEU cycle is something you can budget training time around.
Train in the languages your crew speaks. OSHA requires that safety training be given in a language and vocabulary workers can understand. The workforce makes that concrete: Hispanic or Latino workers were 47.5% of landscaping and groundskeeping workers in BLS's Current Population Survey. An English-only safety talk can miss the people it is meant to protect.
Make the safety rules routine instead of heroic. Locate before every dig. Protective systems and ladder access at the OSHA lines your techs learned on day one, with a supervisor, never the newest hire, owning the call when a trench looks wrong.
Heat planning belongs to you, because the regulatory picture is still moving. There is no federal OSHA heat standard in force; OSHA enforces heat hazards under the General Duty Clause. Its heat National Emphasis Program, reissued with an effective date of April 10, 2026, puts NAICS 5617, which includes landscaping services, on its inspection target list. Build your own water, shade and acclimation plan before the first hot week instead of waiting on a rule.
Keep the paperwork steady too. Landscaping is not on OSHA's list of partially exempt industries, so once you pass 10 employees you keep OSHA 300 injury logs, and NAICS 5617 is a designated industry for annual electronic submission of Form 300A data by establishments with 20-249 employees. A work-related death is reportable to OSHA within 8 hours, and an in-patient hospitalization, amputation or loss of an eye within 24.
Plan the year so the season has a shape: start-ups in spring, service calls through summer, blowouts and winterization in the fall, and an off-season the tech can see. Snow routes where you run them, shop rebuilds, and inventory and controller programming for spring all keep an irrigation tech working in November. A tech who knows what the off-season looks like has less reason to take a warehouse job in October.
And ask why people leave while you can still fix it. Exit conversations cost nothing and tell you more than any benchmark.
This page is employer information, not legal or licensing advice. Confirm your state's irrigation, backflow and employment rules with the agencies named above before you hire or schedule work.

