How to Price Landscaping Jobs: A Pricing Guide for Owners

The pricing method behind the estimate: a loaded labor rate, marked-up materials, equipment hours, overhead recovery and a margin you set on purpose, all built from your own books.

Landscaping Services industry (NAICS 561730), BLS OEWS May 2025

Landscaping and groundskeeping worker median wage

$19.49/hour

First-line supervisors, same industry series, BLS OEWS May 2025

Supervisor median wage

$27.31/hour

Social Security and Medicare, employer share (IRS)

Employer payroll taxes (2026)

6.2% + 1.45%

Establishments with paid employees, Census County Business Patterns, 2023

Landscaping establishments with fewer than 5 employees

83,241 of 117,969

A landscaping job's price is built from your own costs, starting with crew hours at a fully loaded labor rate that sits above the wage itself (BLS OEWS May 2025 puts the median for landscaping and groundskeeping workers in the Landscaping Services industry at $19.49 an hour). On top of labor come materials with your markup, the equipment hours the job consumes, a share of your overhead, and a profit margin you chose on purpose. No industry average can set that number for you, because your payroll, shop, insurance and market are yours alone. This guide walks through each piece.

What is the pricing formula for a landscaping job?

The pricing formula for a landscaping job is the same for every price, from a weekly mowing stop to a full patio build:

Price = labor + materials + equipment + overhead + profit.

Labor is the hours the job takes, at the rate each person on the job actually costs you.

Materials are the plants, seed, sod, mulch, stone, pipe, wire and fixtures the job uses, at your marked-up cost.

Equipment is the hours the machines are committed to the job.

Overhead is the share of your fixed costs the job has to carry.

Profit is the margin you decided to earn, not whatever is left over.

Two things follow.

First, an estimate is only as good as its inputs: if the labor rate is a guess and overhead never made it into the math, the price is a guess too.

Second, the inputs come from your own books, not from an industry average.

We found no government source in our research that publishes markups, overhead percentages or margins for landscaping work, so treat any fixed number you see on a blog or a forum as somebody's opinion or survey figure, not a published benchmark.

The formula has to work without an estimating department behind it, too.

Census County Business Patterns 2023 counted 117,969 landscaping services establishments with paid employees, and 83,241 of them had fewer than 5 employees.

What changes between mowing, cleanups, installs, irrigation, tree work and snow is the estimate of hours, materials and equipment, not the method underneath.

Pricing sits inside the bigger job of hiring and running a landscaping company: the rates in this formula are built from the wages you pay and the hours your crews actually work.

How do I build labor and equipment rates?

You build each labor rate from what one hour of one role costs the company, not from what that person is paid.

It starts at the wage and adds everything that rides on the wage:

  • Employer payroll taxes. For 2026, the IRS sets the Social Security tax rate at 6.2% for the employer and 6.2% for the employee, and Medicare at 1.45% each; the Social Security tax applies to wages up to a $184,500 annual wage base.
  • Workers' compensation. The rate you actually carry lives in your own policy; get it from your policy or your insurance agent rather than a web table.
  • Costs you fund on top of wages: health coverage, retirement match, uniforms, phone allowances, training time.
  • Paid time that never bills: rain days, shop time, windshield time and slow-season hours you pay for anyway.

The method is one division per role: add the role's annual wages to every employer cost above, then divide by the billable hours you realistically sell for that role in a year.

Do it role by role, because a foreman's hour does not cost what a first-year crew member's hour costs.

The federal pay data shows the spread inside the industry.

In the Landscaping Services industry (NAICS 561730), BLS OEWS May 2025 puts the median wage for landscaping and groundskeeping workers at $19.49 an hour.

First-line supervisors in the same industry had a median of $27.31 an hour.

Price the mix, not an average.

A job staffed by a foreman and two crew members carries one loaded foreman hour plus two loaded crew hours for every hour on site.

Estimating everything at one blended rate hides exactly the jobs that are losing money.

Equipment deserves its own rate.

Each machine has an hourly cost: its purchase price spread over the years it works for you, plus fuel, maintenance, repairs, tires, insurance and the trailer it rides on.

Rental rates give you a shortcut for machines you don't own.

Charge the job for every hour the machine is committed to it, including haul time, or the fleet pays for itself out of profit you thought was yours.

How does material markup work?

Material markup is what you add on top of a material's delivered cost, so that cost has to be counted in full first.

Materials are the easiest line to count and the easiest to underprice, because the invoice is not the whole cost of a material.

Cost everything delivered: nursery stock, seed and sod, mulch, pavers and wall block, aggregate base, pipe and fittings, wire and fixtures, and the fuel it takes to get them to the job.

Your markup then has real work to do.

It covers the sourcing and ordering time, the delivery runs and pickup trips, the yard space materials occupy, the waste and off-cuts, and the replacements when plant material fails and you make it right at your own cost.

Overhead and profit are not part of it: overhead comes back through your overhead rate per labor hour and profit through the margin line, so neither gets counted twice.

Set the markup once, deliberately, and apply it consistently.

We did not find a government benchmark for landscaping material markups in our research, so the number has to come from what materials handling actually costs you.

Keep markup and margin straight, in your head and on your estimate sheet.

Markup is what you add on top of cost.

Margin is profit as a share of the selling price.

The same dollars produce two different percentages, so decide which one you are targeting before you build a price, and use that word consistently in your estimating sheet.

Whatever split you choose between labor and materials, state what the material line includes.

Whoever compares your bid is comparing what is inside it; a material line that silently leaves out delivery comes back as a change-order argument later.

How do I recover overhead in my prices?

You recover overhead by adding an overhead rate per labor hour to every price you build.

Overhead is everything that keeps the company open that no single job owns: the shop or yard, the office and dispatcher, insurance, accounting, software, advertising, licenses and permits, truck plates, and the paid hours no customer sees.

The method is one division.

Total your actual overhead for a year from your profit and loss statement, then divide by the hours you actually sold last year: the billable crew hours on real jobs.

The result is an overhead rate per labor hour, and every price you build adds it.

Use real numbers on both sides.

On the cost side, start from last year's actuals and adjust for the changes you already know about: the new shop, the insurance renewal, the extra office hire.

On the hours side, a company that concentrates its sold hours in the growing season needs the denominator to say so; dividing annual overhead by hours you only wish you billed is how overhead quietly stops being recovered.

Skip the overhead line and the consequence is predictable.

The office, the insurance and the rent get paid out of what you meant as profit, and you discover it at year end instead of at the estimate.

Recalculate the rate at least once a year, and whenever something structural changes: a move, a fleet change, a new service line.

The rate is only as current as the costs behind it.

How do I set a profit margin?

You set a profit margin as its own line before you quote, not as the residue after the job.

Decide what the margin has to fund: owner pay, debt service on trucks and shop, equipment replacement, a cushion for the slow months and reserves for a bad-weather year.

Then price to that number.

State the target as a margin on the whole job, and set it for every service line you sell.

Small residential stops and large installs both carry overhead and both carry risk; a cheap-looking job that eats two unpriced return visits costs more than it looks.

The number itself is yours to choose.

Our research did not find a government source for landscaping net margins, and survey figures floating around say more about who answered the survey than about what your company should target.

Derive the target from your own plans and your own books.

Then close the loop with job costing.

After the work is done, compare the price against what the job actually consumed: crew hours from the time records, materials from the invoices, equipment hours from the logs.

The gap between the margin you planned and the margin you got is the most useful number in the company, because it tells you which estimates were wrong and which services to reprice.

How should I price different landscaping services?

You price different landscaping services with the same formula.

What changes is how each input gets estimated.

  • Recurring maintenance (mowing, bed work, weekly routes) prices per visit, off the crew hours a property of that size and condition actually takes, at your loaded rates, with travel between stops counted and overhead and margin on top.
  • One-time cleanups price off estimated hours plus disposal, and they deserve a site visit before you commit a number; the debris a property hides is a real cost.
  • Installs (planting, sod, pavers, walls, landscape lighting, irrigation) price off the takeoff: measured materials at your marked-up cost, the equipment each phase needs, and crew hours by phase.
  • Specialty and licensed work (pesticide applications, irrigation and backflow work, tree work) carries credentials, insurance and equipment that a general crew rate doesn't. Price it at what the trained, licensed person actually costs you, not the crew average. What a license requires is state law, so confirm the requirement with your state's licensing agency.
  • Snow and storm work prices per event or per season, on standby, response and risk economics of their own. The formula underneath doesn't change; the inputs and the contract shape do.

One more input belongs on the list even though it is not a cost: sales tax.

Sales tax treatment is set at the state level, and it varies by state and by service.

In Texas, the Comptroller's rule treats landscaping and lawn and yard maintenance as taxable real property services: mowing, trimming, fertilizing, watering, tree and plant maintenance.

Providers there must hold a Texas sales tax permit and collect and remit sales tax on their charges (34 Tex.

Admin.

Code §3.356).

The same Texas rule handles sprinkler systems, retaining walls, ponds and fences under construction rules instead, and it makes landscaping services performed by landscape designers or landscape architects taxable.

Other states write their own treatment; Texas is the one our research verified.

Confirm how each service you sell is taxed with your state revenue department or a CPA before you set the tax line on an estimate.

What are the common underpricing mistakes?

The common underpricing mistakes are small ones, repeated on estimate after estimate:

  • Pricing backward from someone else's number. Starting from what a competitor charges (or what a customer says a cut should cost) and working down never tells you whether your costs fit inside that number. Price forward from your costs, then decide whether you want the job at the resulting price.
  • Using the wage as the labor rate. An industry median like $19.49 an hour is a benchmark to compare against, not a rate to bill at. The loaded rate adds payroll taxes, insurance and paid non-billable time, and only your books can say by how much.
  • Quoting properties you haven't seen. A price given from the truck is a guess wearing a quote's clothes. Price properties you have measured, or price the site visit.
  • Leaving drive time out of the labor. Federal wage-and-hour rules count travel from job site to job site during the workday, and travel from a required meeting place, such as the shop, to the job, as hours worked. Hours you pay for are hours the price has to carry.
  • Charging the machines nothing. Equipment that never appears on an estimate is paid for out of margin.
  • Stacking discounts on thin prices. A discount taken off a price that already lacks its margin is a job you pay to do. Discount from a price that carries its margin, or decline the job.
  • Renewing last year's price forever. Maintenance contracts that renew at the original number while wages, insurance and fuel move turn good accounts into bad ones. Reprice on a schedule, and say so in the contract.
  • Never checking the work. Without job costing, an underpriced service renews itself year after year unnoticed. Comparing planned margin to actual margin is what catches it.

Fixing these makes the price a decision (costs counted, overhead carried, margin chosen), so the job is won or lost on purpose.

Owner information, not legal, tax or insurance advice. Confirm tax treatment with your state revenue department, insurance costs with your insurer or agent, and anything with legal weight with a CPA or counsel.

Before you send the next estimate

  • Each role's loaded labor rate, rebuilt from current payroll, insurance and benefits
  • Materials costed delivered, with one markup you set deliberately and apply consistently
  • Equipment hours on the job, including haul time, priced at the machine's own rate
  • The overhead rate per labor hour, recalculated from last year's actual overhead and sold hours
  • A margin you chose per service line, added before the quote goes out
  • Travel between stops included wherever crews are paid for it
  • Sales tax treatment confirmed with your state revenue department for each service

Questions employers ask

What is the formula for pricing a landscaping job?

Price = labor + materials + equipment + overhead + profit. Labor means crew and foreman hours at a fully loaded rate: wage plus employer payroll taxes, insurance and paid non-billable time. Materials carry your markup. Equipment hours are priced at the machine's own hourly cost. Overhead is your annual fixed costs divided across the hours you actually sell, and profit is a margin you set on purpose. Build every input from your own records.

How do I calculate a landscaping labor rate?

Start from each role's annual wages, then add the employer costs that ride on payroll: for 2026 the IRS sets Social Security at 6.2% each for employer and employee, up to a $184,500 wage base, and Medicare at 1.45% each. Add your workers' compensation premium from your own policy, any benefits you fund, and paid time that does not bill. Divide the total by the billable hours you realistically sell for that role, and do it role by role.

How much should I mark up landscaping materials?

We found no government benchmark for landscaping material markups in our research, so treat any fixed number you see as somebody's opinion or survey figure, not a published benchmark. Set the markup from what materials handling actually costs you: ordering and delivery time, storage, waste and off-cuts, and replacing plant material that fails. Overhead comes back through your overhead rate per labor hour and profit through the margin line, so keep them out of the markup. Apply it consistently, and state on the estimate what the material line includes.

Do I have to charge sales tax on landscaping work?

It depends: your state sets the treatment, and it varies by service. In Texas, landscaping and lawn and yard maintenance are taxable real property services under the Comptroller's rule. Providers there must hold a Texas sales tax permit and collect and remit sales tax on their charges. Sprinkler systems, retaining walls, ponds and fences fall under construction rules instead. Our research verified Texas only, so confirm how your services are taxed with your state revenue department or a CPA.

More hiring resources

Priced the work? Now staff it.

A price only holds if the crew exists to do the work. List your opening on LandscapingHires, where crew members, foremen, lawn care techs and irrigation techs look for their next crew.