How to Price Lawn Mowing: Per Cut, Per Square Foot and Per Season

The per-cut method behind a mowing route that pays: a minimum that protects short stops, prices built from timed visits, remote measuring, weekly-versus-biweekly math, seasonal billing and raises that stick.

Landscaping Services industry (NAICS 561730), BLS OEWS May 2025

Landscaping and groundskeeping worker median wage

$19.49/hour

Federal wage-and-hour rules count site-to-site travel as paid time

Travel between job sites

Hours worked

Providers need a Texas sales tax permit (34 Tex. Admin. Code §3.356)

Mowing and yard maintenance in Texas

Taxable service

Establishments with paid employees, Census County Business Patterns, 2023

Landscaping establishments with fewer than 5 employees

83,241 of 117,969

Lawn mowing prices start from a labor cost that BLS OEWS May 2025 put at a $19.49 hourly median wage for landscaping and groundskeeping workers in the Landscaping Services industry (NAICS 561730). Price each stop from your own costs: the minutes the lawn takes at a fully loaded labor rate, the drive time between stops, your share of overhead, and a margin you set on purpose. A per-cut minimum protects the short stops, and the season's billing shape comes after the per-visit math, never before it. This guide walks through the method.

How do I set a per-cut minimum?

Set a per-cut minimum by costing your cheapest realistic stop, then use that number as the floor.

Every stop on a mowing route carries costs that do not shrink with the size of the lawn: the drive to it, the unloading, the walk-around, the trimming it needs, and the invoicing behind it.

A per-cut minimum is the floor that keeps those costs covered when a lawn is small.

It answers how little you can charge and still profit with a number you computed instead of one you guessed.

Travel is the reason the floor matters.

Under federal wage-and-hour rules, travel from job site to job site during the workday counts as hours worked, and so does the trip from a required meeting place, such as the shop where crews pick up tools, to the work.

Those hours land on the route whether the stop is a quick one or a long one, so a short stop can carry nearly as much paid time as a long one.

Cost that cheapest stop the way you would cost any job: mowing, trimming, edging and cleanup at your loaded labor rate, its share of the drive time, the equipment, a share of overhead, and margin.

Whatever that comes to is what a stop has to bill before it earns its place on the route.

Building the loaded rate and the overhead share is the full pricing guide's job; the minimum just applies that formula to your smallest stop.

Then protect the floor with routing.

A minimum works when stops cluster: a lawn that cannot justify its own trip out can still justify a place beside the lawns around it.

Price the street, not just the yard.

A cut that fills a gap on a block you already service costs you less than a standalone stop across town, which carries the whole drive alone.

Adjust for the stop you actually saw, not the one the size suggests.

Gates that slow a mower, slopes that force a walk-behind, heavy trimming, edging that needs care, clippings that have to be hauled, grass still wet from last night's rain: each pushes the minutes up, and the price goes with them.

Two lawns with the same footprint can sit on different rungs of your price list because their work is different.

How should I price by lawn size and mowing time?

Price by mowing time, and use lawn size only because it drives that time.

Per-square-foot and per-acre numbers are shorthand for time, and they are only as good as the visits behind them.

Build yours from your own route: once you know how long lawns of a given size take you, converting that into a rate per square foot or per acre gives you a fast first quote, one you refine after the walk.

Deriving the rate is a time study, not a guess.

Time the same lawn on several visits across the season, because growth changes the minutes from spring to midsummer.

Log the parts separately: mowing, trimming and edging, cleanup, and the load-and-unload around the visit.

Honest timings are what your per-area rate converts from, and a lawn that consistently beats or misses its estimate is telling you the rate needs another look.

Your labor cost anchors all of it.

In the Landscaping Services industry (NAICS 561730), BLS OEWS May 2025 put the median wage for landscaping and groundskeeping workers at $19.49 an hour and the mean at $20.62.

Treat those as a comparison point for what labor costs in this trade, not as a rate to bill out.

The rate your prices actually use is the wage plus employer payroll taxes, insurance, benefits and the paid time that never bills; building that loaded labor rate is its own exercise, covered step by step in the pricing guide.

The per-area rate then does what a time study alone cannot: it lets you quote a stranger's lawn in a minute.

Measure it, match it to the size class your timings cover, and adjust for what the measurement cannot see.

When the first cut runs long, you have learned which class the lawn really belongs in, and the price moves at the next visit or the next season.

How do I measure lawns remotely?

Measure lawns remotely with aerial and satellite measurement tools (in mapping apps and in lawn care business software) that let you trace a property's outline and read its area without driving there.

Use them for the first pass, before you quote.

Trace the mowable area rather than the lot line: leave out the house, the driveway, the beds, the rock and mulch, the play set, and anywhere you trim by hand instead of mow.

Remote measurement has hard limits, and they are the reason the first visit still happens.

A satellite view cannot show the gate the mower has to fit through, the slope that slows the crew, the fence line that needs a trimmer, the dog, the clutter, or where a trailer would park.

Walk the property before the price becomes a commitment, and confirm the drawn area against what the crew will actually face.

The site-walk step in the bidding guide covers what to look for.

Write the measurement down, with the assumptions behind it, in whatever system your route runs on.

Consistent measurement is what makes your quotes comparable: across lawns, across seasons, and across whoever does the estimating.

Re-measure when the property changes, because a new shed or a bed expanded into turf changes the mowable area, and the mowable area is what you price.

Treat the drawn number as the start of the estimate, not the end of it.

It sizes the job for a first price and tells you which size class the property belongs in; the walk, the timings and the first cut decide whether that price holds.

How should I price weekly versus biweekly mowing?

Price weekly and biweekly mowing as two different jobs, each from what its own visit takes.

The longer interval carries more growth: taller grass, a heavier clipping load, slower mowing, and more trimming to catch what the longer stretch let get away.

Never price one as a fraction or a multiple of the other interval's price.

The stopwatch settles it.

When a customer asks about switching frequency, time the new schedule before you name a price: a biweekly price copied from the weekly rate with a guess attached is how biweekly routes become the ones that lose money.

Run the visit, log the minutes, and price from what actually happened.

Frequency shapes the route, too.

Weekly stops fill dense routes on streets you already service, and density spreads drive time across more billed visits.

Biweekly service means more properties on the calendar to fill the same days, and more miles between them, a real cost even when the cut itself prices the same.

Quote the season both ways before anyone switches, so the customer decides on the full-year price rather than the per-visit number.

Write the frequency into the agreement when the customer picks one.

The visit count, the season they cover, and what happens when weather interrupts the schedule all belong in the contract terms covered below.

How do seasonal and monthly mowing contracts work?

Seasonal and monthly mowing contracts work from the per-visit price: build the season total from it, never the other way around.

Multiply the per-cut price by the number of visits you are committing to for the growing season, and you have the season number a contract needs.

A customer who prefers easier budgeting can pay it as equal monthly amounts.

The monthly figure is a payment plan for a total you already priced, not a substitute for the per-visit math.

Put the terms where both sides can see them.

A mowing agreement pins down which visits are included and how often, what happens when weather cancels a visit or a drought pauses the season, which services bill separately (cleanups, mulch, aeration, overseeding), and how the price can change next season.

The clauses worth considering are laid out in the maintenance contract guide.

Sales tax is a state question, and it lands on the price you quote.

In Texas, the Comptroller's rule treats landscaping and lawn and yard maintenance as taxable real property services: mowing, trimming, fertilizing, watering, tree and plant maintenance.

Providers there must hold a Texas sales tax permit and collect and remit sales tax on their charges.

Texas is the state our research verified for this; treatment differs elsewhere, so confirm how mowing is taxed in your state with your state revenue department before the tax line goes on an invoice.

If you sign customers at their kitchen table, a federal rule rides along with the sale.

The FTC Cooling-Off Rule gives buyers 3 business days to cancel door-to-door sales of consumer goods or services of $25 or more made at the buyer's home, or $130 or more at other temporary locations.

It also requires the seller to provide a written contract with the cancellation statement, two copies of a Notice of Cancellation, and an oral notice of the right.

If your residential sign-ups happen at the door instead of at your place of business, read the rule's text against your own process.

Monthly billing also changes your cash flow, and it should do so on purpose.

Equal payments arrive from month one instead of trailing the visits, which is exactly why the season total has to be right before the first payment lands.

When and how should I raise mowing prices?

Raise mowing prices when one of two honest triggers fires: your costs moved, or the work changed.

Wages, insurance, fuel and equipment all move over time, and a price that never revisits them is quietly shrinking.

The work changes too: a lawn thickens, a "quick mow" grows into trim-plus-cleanup, a customer adds a bed you now edge around.

Re-run the stopwatch before you announce anything: if the minutes changed, the new number is a re-quote, not a raise.

Handle the two audiences differently.

New customers get the new price from the first quote, so there is nothing to raise.

Existing customers get written notice before the next season starts, with the reason attached: what your costs did, and what the new price covers.

A rate that arrives mid-season with no explanation reads as arbitrary; the same rate, explained before the season, reads as a plan.

Tie the decision to your own numbers, not to a neighbor's.

Job costing (comparing what a stop actually consumed against what it billed) tells you which stops can carry an increase and which never could.

A stop that cannot pay for its own time and its place in the route is the one to let go, and losing it at the better price is the raise working, not failing.

Pricing sits inside the larger work of hiring and running a landscaping company: the per-cut number is built from the wages you pay and the hours your crews work, and it gets revisited whenever either changes.

Owner information, not legal, tax or insurance advice. Confirm your state's sales tax treatment with your state revenue department, and contract and cancellation questions with counsel before you put them in writing.

Before you quote the next route

  • Every lawn on the route measured: traced remotely, then confirmed on the first visit
  • Timings logged for each size class, across a stretch of heavy growth
  • A loaded labor rate per role, from current payroll, taxes, insurance and benefits
  • Drive time between stops in the labor math, because federal rules count it as hours worked
  • A per-cut minimum set from your cheapest realistic stop
  • Weekly and biweekly prices each built from their own timed visits
  • A season total and equal monthly payment derived from the per-visit price
  • Sales tax treatment confirmed with your state revenue department

Questions employers ask

How do I figure out what to charge to cut grass?

Time the stop first: mowing, trimming, edging and cleanup, plus the load-and-unload around it. Cost those minutes at your loaded labor rate (the wage plus employer payroll taxes, insurance and paid non-billable time). Add the stop's share of drive time, which federal wage-and-hour rules count as hours worked, then a share of overhead and your margin. That total is the honest per-cut price, and a minimum keeps it from eroding on small lawns.

Should I charge per cut or a flat monthly price?

Start per cut, until your timings have proven themselves across a season. Once the per-visit price is solid, build the season total (the per-cut price times the visits you commit to) and let customers who want predictability pay it as equal monthly amounts. The monthly figure is a payment plan for a total you already priced, and the agreement should say which visits it covers, how weather is handled and which services bill separately.

Do I have to charge sales tax on lawn mowing?

It depends: your state decides. In Texas, the state our research verified, landscaping and lawn and yard maintenance (mowing, trimming, fertilizing and watering) are taxable real property services, and providers there must hold a Texas sales tax permit and collect and remit sales tax on their charges. States write their own treatment, so confirm how mowing is taxed where you operate with your state revenue department.

What is a per-acre mowing price based on?

On your own timed visits, converted into a rate. Measure the turf, match it to the size classes you have timed across the season, and price from the minutes those lawns actually took, not from a chart somebody else published. Remote measurement makes the first quote fast, and the first on-site cut confirms whether the lawn belongs in the size class you priced it in.

More hiring resources

Priced the route? Now staff it.

A per-cut price only holds if the crew exists to cut it. Post your crew, foreman and lawn tech openings on a board built for landscaping, lawn care, irrigation and tree care hiring.