How to Hire Backflow Testers: A Landscape Employer's Playbook

Backflow testers hold credentials that renew on a cycle (every three years for ASSE certifications), so this employer playbook covers day-one testing and reporting skills, where to find certified candidates, pay benchmarks, credential screening, the license-versus-certification picture, and the retention work that keeps a good tester on your side.

Founder, LandscapingHires
November 13, 2026

Pay benchmark

$30.67/hr median (closest available)

BLS OEWS May 2025 national median hourly wage for Plumbers, Pipefitters, and Steamfitters (SOC 47-2152), all industries. Backflow testers have no occupation of their own in the BLS wage tables, so this is the closest available proxy, not the role's own pay.

BLS OEWS May 2025, SOC 47-2152 Plumbers (closest available), all industries

Closest pay benchmark

$30.67/hr median

California's SWRCB list (updated 8/26/2026) recognized ABPA, ASSE 5110 and CA-NV AWWA for July 1, 2026 – July 1, 2027

Who sets the credential

State + water system

8-hour class, 50-question written exam and hands-on practical

ASSE 5110 recertification

Every 3 years

40-hour course, $111 fee, written and practical exams; 24 CE hours (8 hands-on) to renew

Texas BPAT (state license example)

3-year license

What does a backflow tester need to be able to do on day one?

On day one, a backflow tester needs to be able to isolate the assembly, connect a test kit, run the test sequence, read the results, and complete the paperwork. The role earns its keep on two outputs: a test performed correctly and the report that documents it.

The scope can run wider than irrigation. Texas is the clearest example: anyone who tests or repairs backflow prevention assemblies must hold a TCEQ Backflow Prevention Assembly Tester (BPAT) license, and BPATs are qualified to test and repair assemblies on any domestic, commercial, industrial or irrigation service.

That range matters when you plan staffing. One Texas-licensed tester can cover the assemblies on your irrigation customers' systems and the ones inside the commercial buildings you service, instead of handing the commercial work to a subcontractor.

The paperwork is the half new hires get wrong. Who may test, and with which credential, is set by states and by local water purveyors (the water systems you serve), and the requirements can differ from one system to the next. A tester who learned one system's rules needs time to learn the next.

Ask candidates how results were submitted at their last job, and ask to see a sample report with the customer's name removed. You are screening for documentation discipline as much as for test skill, because a test without its report leaves nothing on file to show the work was done.

Decide the equipment question before the offer. Either the tester brings a current test kit or your company issues and maintains the gauges. The mistake is leaving it undecided until the tester's first route day. Put kit ownership, calibration expectations and replacement policy in writing.

For the work itself from the worker's side, our career guide describes what a backflow tester does, and the backflow tester jobs page shows how the postings read right now.

Looking to hire? Post your backflow tester role on LandscapingHires and reach people who already work in landscaping, lawn care and tree care.

Post a Backflow Tester Job →

Where do landscape companies find backflow testers?

Landscape companies find backflow testers first inside their own crews, then at tester schools and in adjacent trades. Irrigation techs are the natural first look: in Texas, an Irrigation Technician may connect an irrigation system to a water supply, including installing a backflow prevention device, under a licensed Landscape Irrigator's supervision. A tech who has set and serviced those assemblies already knows what they do and where they sit.

TCEQ's own experience rule makes that pipeline official, in Texas at least: two years of approved work experience counts toward the BPAT license, and installing or repairing lawn irrigation systems is on TCEQ's list of approved experience. Your irrigation crew's time installing and repairing lawn systems counts as approved experience there.

The second channel is the schools that run tester courses. ASSE certification is earned by completing a course at an ASSE-approved school and passing its exams (a written exam for every program, a practical for some), with ASSE itself making all certification decisions. The schools that teach those courses graduate exactly the people your ad targets, so ask the training providers near you how to reach students finishing a course.

Adjacent trades are worth a call too. ASSE's Series 5000 covers cross-connection control as a family of qualification standards: 5110 for backflow prevention assembly testers, 5120 for cross-connection control surveyors and specialists, 5130 for assembly repairers, and 5140 for fire protection system testers. Repairers, surveyors and fire-protection system testers work the lanes next door, so people in those trades can already hold a related credential.

Write the ad around the credential. Name the certification or license your water systems actually accept, state whether the company or the tester supplies the test kit, and post the pay range. A vague ad wastes its click on candidates whose card does not match your water systems' requirements.

Work the channels in the cross-role guides on hiring and running a landscaping company: recruiting channels, job ad wording and the seasonal hiring calendar all carry over to a credential hire. Where to find landscape workers covers the wider channel list.

What should you pay a backflow tester?

Pay a backflow tester against the closest available code: plumbers, pipefitters and steamfitters (SOC 47-2152), a reference point for a related licensed trade, not the role's own pay. Federal wage tables have no backflow-tester occupation, so there is no BLS wage under the title.

In BLS OEWS May 2025, that occupation showed a national median of $30.67/hour ($63,800/year) and a mean of $72,170/year, with the 10th percentile at $44,150 and the 90th at $108,420, across 465,840 wage-and-salary jobs, all industries.

Two limits sit on that benchmark. OEWS pay is straight-time: base rate, commissions, production bonuses, incentive pay and tips are inside the number, and overtime pay is excluded. And OEWS counts wage-and-salary employees only, so the self-employed and owners are not in it.

Where a candidate lands in your range should track three things: the credential your water systems accept and what it took to earn it, whether the tester repairs assemblies as well as testing them, and who owns the test kit. In Texas the BPAT license covers testing and repair, so a tester there can repair and retest a failed assembly on the same visit instead of only flagging it.

Budget the credential into the offer. The class, exams and renewal cycle are recurring costs of the role, and a written answer on who pays them is cheaper than re-hiring after a lapsed card.

Post the range in the ad and keep it current. For the plan types (hourly, production pay, bonuses) and how they interact with overtime, see landscape crew pay plans.

How do you screen and test backflow tester candidates?

Screen and test backflow tester candidates in three passes: verify the credential before the interview, watch a test performed, and finish with a paid working tryout on one of your own assemblies.

Verification comes first. Ask for the card or certificate and check the expiration date before you spend interview hours. ASSE certifications must be renewed every three years, and holders can recertify up to six months early without losing time on the credential. Renewal is not a rubber stamp: ASSE 5110 testers recertify with at least an 8-hour class, a 50-question written exam (rising to 100 questions from January 1, 2027) and a hands-on practical exam.

An expired card is not a disqualifier by itself, but it is a scheduling fact: where the state or the water system requires a current credential, testing work stops until the recertification clears.

Check the jurisdictions you actually serve, not just the state. California's list carries its own reminder that counties, cities and other authorities having jurisdiction may impose additional tester requirements. That reminder is California's, but the habit it suggests is not: ask candidates which water systems and cities they have worked in, then confirm your own jurisdictions' rules with each authority.

Then watch the work. Set up a known assembly (one that passes, or one with a fault you have planted and documented) and have the candidate run the sequence while narrating it. You are listening for a method, not memorized numbers:

  • Kit hookup and isolation done before any reading is taken.
  • The sequence narrated step by step, not performed in silence.
  • Readings recorded as measured, with pass or fail called on the results.
  • The report completed in full, including the fields the water system requires.
  • A failed assembly flagged for repair and retest instead of waved through.

Pay for the tryout block. Under the Department of Labor's hours-worked rule for employees, travel between job sites during the workday counts as hours worked, and so does travel from a required meeting place, such as the shop where crews pick up tools, to the job. Our research found no DOL guidance on candidates specifically, so pay for the whole block and confirm how your tryouts are treated with the Wage and Hour Division.

Plan for the trust the role carries: testers go into mechanical rooms and plant rooms on commercial properties, and they drive between sites in your truck. If you order background or driving-record reports through a background-check company, the Fair Credit Reporting Act applies. That means a stand-alone written notice that is not part of the application. And before you reject someone over a report, you give a pre-adverse-action notice with a copy of the report and a summary of rights. After an adverse action, give the reason, the reporting company's contact details, and the candidate's right to dispute the report and get a free one within 60 days.

Score every candidate on the same sheet, and make the offer decision the same day while the demonstration is fresh.

What licences or certifications should a backflow tester hold?

A backflow tester should hold the license or certification your state and water systems accept; no single national credential answers the question. Who may test backflow assemblies, and with which certification or license, is set by states and by local water purveyors, and the two can differ. Ask each water system you serve which credentials it accepts for testers in its service area. That answer decides your job ad.

The certifying bodies are one lane. ASSE's Series 5000 sets professional qualification standards for cross-connection control, with ASSE 5110 written for backflow prevention assembly testers. Certification runs through ASSE-approved schools: candidates complete the training course, pass the written exam and, for some programs, a practical, while ASSE retains sole responsibility for the certification decisions.

California shows how a state builds its own list of acceptable bodies. The State Water Resources Control Board's list, updated August 26, 2026, recognizes three tester-certification organizations for July 1, 2026 through July 1, 2027: ABPA, ASSE 5110 and the CA-NV Section of AWWA. After July 1, 2027, only ANSI-accredited bodies are acceptable under that list. On the current update, CA-NV AWWA holds ANSI accreditation, ABPA and ASSE are shown as in process, and NCBPA is not recognized. If you hire in California, date the credential requirement in your ad to the current list, not last year's.

Texas shows the other lane: a state license instead of a body certification. Anyone who tests or repairs backflow prevention assemblies there must hold a TCEQ BPAT license, covering domestic, commercial, industrial and irrigation services. The license requires a high school diploma or GED, two years of approved experience, a 40-hour approved course and a $111 application fee. Installing or repairing lawn irrigation systems counts toward the experience requirement. The exams are a written test at a computer-based testing center plus a practical exam given by the training provider. The license is valid for three years, and renewal requires 24 hours of continuing education, 8 of them hands-on. Our Texas irrigation license guide covers the state's irrigation licenses alongside BPAT.

Neither example transfers: other states differ, and course lengths, fees and renewal cycles belong to each state or certifying body. The Texas and ASSE figures above are theirs, not a national template.

Keep the license-versus-certification line clean in the ad and in your records. Name which instrument your jurisdiction requires (a state-issued license, as Texas does, or a certification from a recognized body, as California's state list does) and hire against that instrument. Our backflow tester certification guide covers the bodies and their cycles in detail.

Before you write a credential requirement into a job ad or schedule testing work, confirm the current rules with your state licensing agency and with each water system you serve. Tester requirements are set by states and by local water purveyors, and they change.

How do you keep backflow testers once hired?

Keep backflow testers by making the credential your retention lever. Put the recertification cycle on the company: pay for the class, the exams and the renewal fee, and schedule them on paid time. ASSE 5110 testers face an 8-hour class, a written exam and a practical every three years; Texas BPAT holders owe 24 continuing education hours every three years, 8 of them hands-on. Those are predictable costs, and a company that covers them removes a reason a tester might let a card lapse, or carry it to an employer who does pay.

Build the ladder behind the credential. In Texas, installing or repairing lawn irrigation systems is approved BPAT experience, so an irrigation tech who wants the license has a path your company can fund: the course, the exams, and once licensed, testing work on the routes they already run. A visible rung like that keeps an ambitious tech, and it fills the tester seat with someone who already knows your customers.

Give the year a shape. Fold testing into your irrigation calendar (start-ups in spring, testing ahead of peak season, winterization in the fall) so the tester's workload is planned instead of reactive. Where you run off-season work, put the tester on it: keeping crews through winter covers the off-season options, and landscape employee retention covers the program around them.

Decide the equipment policy and write it down: whether the company issues and calibrates test kits or the tester keeps their own, what happens when a gauge is dropped or a reading is disputed, and who pays for repairs to company kit. Equipment ambiguity invites disputes; settle it on day one instead.

Review the paperwork rhythm the way you review route completion. The tester's reports are your working relationship with every water system you serve, so treat filing timeliness as a company number, and fix submission problems as company problems rather than the tester's alone.

And ask why people stay while you can still act on it. A short conversation at each renewal milestone (card renewed, gauge calibrated, season planned) costs nothing and surfaces the next offer risk early.

This page is employer information, not legal or licensing advice. Confirm your state's tester licensing rules and each water system's program requirements with the agencies and authorities named before you hire or schedule backflow work.

Frequently Asked Questions

Does a backflow tester need a license or is a certification enough?

It depends on the state and the water system.

Texas requires its own TCEQ BPAT license for anyone who tests or repairs backflow prevention assemblies.

California's State Water Resources Control Board recognized tester certifications from ABPA, ASSE 5110 and the CA-NV Section of AWWA for July 1, 2026 through July 1, 2027.

After that date, only ANSI-accredited bodies are acceptable under California's list.

Ask each water system you serve which credential it accepts, and confirm the state rule with the agency.

What should you pay a backflow tester?

BLS has no backflow-tester occupation, so the closest available benchmark is plumbers, pipefitters and steamfitters (SOC 47-2152): in BLS OEWS May 2025, a national median of $30.67/hour ($63,800/year) and a mean of $72,170/year, all industries.

Treat it as a reference point for a related trade, set your actual range against your local market and service mix, and post the range in the ad.

Can you train an irrigation technician to become a backflow tester?

Yes, where the state's path allows it, and Texas shows how directly it can run: two years of approved work experience counts toward the BPAT license, and installing or repairing lawn irrigation systems is approved experience there.

The license adds a 40-hour course, a $111 fee and written plus practical exams.

ASSE certification runs through approved schools with its own exam requirements.

Confirm your state's requirements before you promise the step.

How often does a backflow tester certification renew?

ASSE certifications renew every three years, but the cycle belongs to the certifying body or the state license, and they differ.

For ASSE 5110 testers, recertification requires at least an 8-hour class, a 50-question written exam (rising to 100 questions from January 1, 2027) and a hands-on practical.

Texas BPAT licenses are valid three years, and renewal requires 24 hours of continuing education, including 8 hours hands-on.

Confirm the cycle that applies to your credential with the body or agency.

Hiring a Backflow Tester?

Post your opening on LandscapingHires and reach crews, foremen and techs on the board they check for landscaping jobs.

More Hiring Guides

Looking for a backflow tester position yourself? Browse open Backflow Tester jobs →