A backflow tester qualifies by first meeting the state's prerequisites, which in Texas are a high school diploma or GED plus two years of approved experience.
Next come a tester course and exams through a certification your state's program accepts, then a compliant test kit and registration with the water purveyors whose systems you will test in.
Nationally, tester certifications include ASSE 5110 and ABPA.
This page walks that sequence; the details are set state by state and water system by water system.
Who can become a tester
Our research found no national tester license: state programs set who may test, water suppliers' cross-connection programs add their own paperwork on top, and the entry gates differ in kind from one state to the next.
Texas shows the experience-based gate.
The Texas Commission on Environmental Quality (TCEQ) licenses Backflow Prevention Assembly Testers, and applicants need a high school diploma or GED plus two years of approved experience.
Installing or repairing lawn irrigation systems counts toward those two years.
Illinois shows the plumbing-based gate.
Its cross-connection rule requires backflow testers (the state calls them cross-connection control device inspectors) to be authorized to perform plumbing under the Illinois Plumbing License Law, on top of a hands-on course and written and performance exams.
Backflow testing also sits inside the state-by-state irrigation licensing picture.
The Irrigation Association's licensing summary names Louisiana, New Jersey, North Carolina and Texas as states requiring an irrigation-specific contracting license.
The same summary puts California, Connecticut, Oregon, Illinois and Rhode Island under a license that is not solely irrigation-specific but governs irrigation work, and lists Florida as offering a voluntary state license that exempts holders from local irrigation licenses.
That is the association's reading of a patchwork, not each state's law.
The per-state detail sits in irrigation licensing by state.
If you already work in irrigation, you are not starting from zero: Texas explicitly counts lawn irrigation installation and repair as approved experience.
What the job itself looks like day to day is the subject of the backflow tester career guide.
Training and exam
In the programs we read, the path has a consistent shape: a course from an approved provider, then a written exam, and on some programs a hands-on practical as well.
ASSE International shows the mechanics.
Certification is earned through an ASSE-approved school: complete the training course, pass the written exam and, for some certification programs, a practical exam as well.
The school teaches the course; ASSE makes the certification decision.
ASSE 5110 is the tester line of the ASSE/IAPMO/ANSI Series 5000 professional qualifications, which also cover cross-connection control surveyors and specialists (5120), backflow prevention assembly repairers (5130), fire protection system testers (5140) and backflow prevention program administrators (5150).
ABPA (the American Backflow Prevention Association) certifies backflow prevention assembly testers too, alongside cross-connection control specialists.
Courses come from more places than the credential bodies.
The University of Southern California's Foundation for Cross-Connection Control and Hydraulic Research runs cross-connection control program courses, and its own page describes the typical attendees as water utility personnel, health agency personnel, those from large water-using facilities and private contractors.
Whichever course you pick, the certification has to clear the program you will test under, and acceptance can turn on a calendar.
California's Cross-Connection Control Policy Handbook took effect July 1, 2024.
From July 1, 2026 to June 30, 2027, backflow assembly testers in California must hold a certification from an organization recognized by the State Water Resources Control Board.
ASSE's page says its 5110 tester certification was recognized there in a letter dated June 17, 2025.
Course hours, exam formats, fees and renewal rules are each issuer's own, and they vary enough that guessing is expensive.
Texas' TCEQ course and fee schedule, ASSE's recertification cycle and the state-by-state picture are the certification details page's subject.
Check acceptance before you enroll
Buying a test kit
The kit is a tester's basic work tool: a differential pressure gauge with the fittings to connect it to an assembly.
South Carolina's renewal rule shows what the gauge gets used on: testers renewing there perform the prescribed tests on an RP assembly, a double check valve assembly and a pressure vacuum breaker, using their own differential pressure gauge.
Do not buy on spec, because the program that will accept your reports decides what the kit and its gauge must meet.
Washington's rule for backflow assembly testers requires a field test kit that meets Appendix A, Section A.7 of the USC Manual of Cross-Connection Control (10th edition).
The same rule requires the kit to be evaluated, pressure-tested and accuracy-checked by an independent laboratory at least once in the 12 months before the inspection and field test date.
Oregon sets its requirement on the gauge side: certified testers there must have their test gauges calibrated every 12 months, ideally in the same month each year, and send gauge calibrations in with their certification renewal.
South Carolina puts a number on accuracy: the gauge must be accurate within 2% of full scale or plus or minus 0.3 pounds per square inch differential, and an inaccurate gauge must be calibrated or repaired before certification renews.
So the buying sequence runs backward from the paperwork.
Ask each water supplier and state program you will work under which kit standard and gauge accuracy it enforces, keep the calibration records, and buy a kit that satisfies the strictest program on your list.
What a kit costs is set by the maker, and our research carries no price figures.
The requirement worth checking before the purchase is the program's, not the sticker's.
Registering with water purveyors
The water purveyor (the utility that supplies the property) is the body your work flows back to.
The state cross-connection rules we read route the paperwork there: test reports, kit-accuracy documentation and tester certification records all reach it, and Washington's rule requires purveyor cross-connection programs to document tester certification and test kit calibration.
Washington's rule makes the routing concrete.
A backflow assembly tester there records results on an inspection and field test report and submits the completed report to both the owner of the backflow preventer and the purveyor.
The submission includes laboratory documentation of the test kit's accuracy and a copy of the state-issued tester validation card.
Illinois' rule for community water supplies points the same direction.
Records of the annual inspection go to the community water supply, and each device carries a tag listing the date of the most recent test.
An on-site log records the type of test kit used and the date of its most recent calibration, the test results with a pass/fail statement, and any repairs.
For a new tester, the practical step is a round of calls before the first job.
Ask each purveyor you would test under which credential it accepts, which report form it uses and how it wants results submitted.
Some state rules route reports to local authorities as well: Missouri's requires testers to report results to the water supplier, the customer and any local authority.
Ask what applies in each territory you work.
Doing that round of calls, and completing each purveyor's paperwork, is what turns a certificate into booked work.
First jobs or starting a testing business
The work sits where the water connections are: irrigation and plumbing contractors whose systems create test obligations, water suppliers running their cross-connection programs, and multi-site properties with assemblies that have to stay tested.
Those are the employers a new tester calls on first.
Irrigation is one trade this credential stacks onto: the route in is the one described in becoming an irrigation technician, with testing added as the water-supply-side specialty.
Going independent is the second path.
The credential (certification or state license) is the trade entry, but a testing practice is a business, and the business layer comes with it: registering the company, the state and local licenses that apply, insurance.
The business-license guide walks that paperwork from the owner's side.
Two things the research cannot settle for you: what a test is worth in your market, and how quickly a client list builds.
Per-test prices and income figures are outside our data.
What the state rules do show is where repeat work comes from: Illinois' rule puts device inspections on at least an annual cycle, so a tester registered with the community water supplies is positioned for the recurring inspections those cycles create.
Career information, not legal or licensing advice. Confirm prerequisites, accepted credentials, kit requirements and purveyor registration with your state's cross-connection control program and every water supplier you plan to test under.

