Landscape Equipment Operator Career Guide: Skid Steers, Mini-Excavators and Loaders

Founder, LandscapingHires
November 2026 8 min read

O*NET's closest match for the landscape operator seat: Operating Engineers and Other Construction Equipment Operators

Closest available occupation

47-2073 (closest)

BLS OEWS May 2025, 47-2073, all industries

Median pay, closest available

$28.78/hour

All industries, wage-and-salary workers

National employment, 47-2073, the closest available group

478,090 employed (OEWS May 2025)

49 CFR 383.5 — single vehicles at 26,001 lb GVWR, combinations at 26,001 lb GCWR with a towed unit over 10,000 lb GVWR

Federal CDL line

26,001 lb

A landscape equipment operator runs the machines on a landscaping crew, a seat O*NET matches most closely to 47-2073, Operating Engineers and Other Construction Equipment Operators.

Skid steers, compact track loaders, mini excavators and loaders are among those machines.

The seat does the digging, grading, lifting and hauling that hand work cannot, on install sites, maintenance routes and snow events.

You reach it through a crew job, supervised seat time and the safety layer that comes with the machines.

What is a landscape equipment operator?

A landscape equipment operator is the crew member whose main job is running powered equipment on landscape sites.

On an installation crew that means excavating, rough-grading and moving material.

On a maintenance operation it can mean loading trailers, hauling and, once winter arrives, snow removal.

The seat sits inside the landscape crew: the machines handle digging and hauling while landscapers and hardscape installers do the hand and placement work.

The seat travels under several titles.

O*NET's closest match for the occupation is 47-2073.00 Operating Engineers and Other Construction Equipment Operators, and its sample titles include Back Hoe Operator, Equipment Operator, Heavy Equipment Operator and Track Hoe Operator.

Federal wage data has no separate SOC that isolates the landscape seat: landscape-company equipment operators are often coded under 37-3011, the landscaping and groundskeeping occupation, instead of 47-2073.

The core tasks read straight from O*NET's profile of the occupation.

The top-ranked task is learning and following safety regulations, followed by avoiding hazards such as utility lines, other equipment, workers and falling objects.

Operators locate underground services such as pipes and wires before beginning work.

They operate loaders to pull stumps, rip asphalt or concrete, rough-grade properties and do general cleanup.

What separates the operator seat from general crew work is judgment with a machine attached.

Reading the ground, keeping a machine inside its limits and knowing what is buried under the surface before a bucket reaches it are the skills a foreman is trusting when the keys change hands.

Looking for landscape equipment operator jobs? Browse open positions →

Machines a landscape equipment operator runs

The seat's machines fall into four families.

Skid steers and compact track loaders are the general-purpose machines that dig, carry, push and grade on residential and commercial sites.

Mini excavators dig trenches, foundations, planting pits and utility lines where a full-size excavator is more machine than the site needs.

Wheel loaders and backhoes move the large volumes of soil, gravel and palletized material, and they load the trucks that haul it away.

The base machine changes jobs through its attachments.

O*NET lists selecting and attaching blades and other attachments among the occupation's tasks, and an operator swaps between attachments such as buckets, forks, grapples and brooms as the day's scope changes.

Attachment fluency is what lets one machine cover so much of the crew's work.

Every dig should start with a locate.

O*NET puts locating underground services such as pipes and wires before beginning work among the occupation's tasks, and the national 811 service exists for that step.

811 is free: contact it or your state 811 center a few business days before digging, and buried utilities get marked with paint or flags.

811's own guidance is that every digging project requires contact regardless of depth, because some utilities sit just inches below the surface.

The machines also ride on trucks and trailers, and that is where the driving rules begin.

Under 49 CFR 383.5, a CDL-class commercial motor vehicle includes a single vehicle of 26,001 lb GVWR or more, and a combination of 26,001 lb GCWR or more where the towed unit is over 10,000 lb GVWR.

FMCSA's drug and alcohol testing rules reach drivers who operate commercial motor vehicles subject to CDL requirements.

The machine is one skill; the truck and trailer behind it is another track entirely.

How to become a landscape equipment operator

The path into the seat runs through crew work, supervised seat time and the safety layer that comes with the machines.

  1. Start on a crew

    Take a laborer job on an installation or maintenance crew. You learn the sites, the material flow and how a foreman stages work, which is the context that makes machine work safe later.
  2. Get supervised seat time

    Ask to run the machines on the low-stakes tasks first: moving spoil, loading the trailer, cleanup passes. Supervised repetition on simple work is where operators are built.
  3. Learn the safety layer

    On construction work, the employer carries the instruction duty: OSHA's construction rules require employers to instruct each employee in recognizing and avoiding unsafe conditions and the regulations applicable to the work. Learn the locate process and each machine's operator manual as part of the job.
  4. Add the truck credentials the fleet needs

    If the job moves machines on trailers, check the CDL lines: 26,001 lb GVWR for a single truck, or 26,001 lb GCWR for a combination towing more than 10,000 lb. Drivers subject to CDL requirements also fall under FMCSA's drug and alcohol testing rules.
  5. Apply with a machine-focused resume

    List every machine you can run, the attachments you know and any truck credentials you hold. Watch landscaping-only job boards for operator openings, alongside the general boards.

How fast the move happens is set by seat time and by how much machine work your crew actually has.

Make the interest known early, take the unglamorous machine tasks, and keep the safety habits sharp.

Those are the things a hiring foreman can verify from your history.

Training and certification for landscape equipment operators

Much of the training for this seat comes through the employer.

OSHA's construction rules require employers to instruct each employee in recognizing and avoiding unsafe conditions and the regulations applicable to the work, and O*NET ranks learning and following safety regulations as the occupation's most important task.

The training a new operator actually gets, from locates to machine limits, is that duty put into practice.

One powered machine carries a specific federal training rule.

OSHA's powered industrial truck standard covers forklifts and requires employers to ensure each operator completes the training and evaluation in 29 CFR 1910.178(l), which matters where landscape and nursery work includes yard forklifts.

Whether that standard reaches skid steers, mini excavators or telehandlers was not established in our research.

Treat certification requirements for those machines as an employer question rather than a settled one.

Operators build the rest from a mix of supervised seat time, each machine's operator manual, dealer or manufacturer training when an employer arranges it, and the safety courses a company signs its crews up for.

Ask a hiring foreman what training and evaluation a new operator gets.

The answer tells you how seriously the company runs its safety program.

Confirm before you count on a card

Training and certification questions change with the machine, the state and the employer. Confirm current requirements with OSHA, FMCSA and your state licensing agencies, and ask any employer what training and evaluation it puts new operators through.

Landscape equipment operator pay

BLS has no occupation that isolates the landscape equipment operator seat.

The closest available figure is 47-2073 Operating Engineers and Other Construction Equipment Operators: a median of $28.78 per hour and 478,090 employed nationally in the May 2025 OEWS survey, all industries, wage-and-salary workers only.

Landscape-company equipment operators are often coded under 37-3011 Landscaping and Groundskeeping Workers instead, so treat the 47-2073 figure as a broader, cross-industry reference point rather than a landscaping wage.

Hours follow the season, and annual pay follows the hours.

BLS describes grounds maintenance work as mostly full time and potentially busier in spring, summer and fall, with some jobs seasonal and some workers moving to snow removal in winter.

The number on a posting is the employer's own figure; ask it early in the conversation.

Landscape equipment operator career path

On an installation crew the seats stack: crew laborer work feeds the operator seat, which can lead toward lead-operator or foreman seats.

Each rung adds scope: first the machines, then the crew around them, then the schedule and the customers.

Operators who like the machines more than the schedule have adjacent seats too, including small-engine mechanic work on the mowers and handheld equipment.

For that path, BLS puts the median for outdoor power equipment and other small engine mechanics (49-3053) at $23.02 per hour, 36,060 employed, in the May 2025 OEWS, all industries.

Winter is part of the path, not an off switch.

O*NET's 47-2073 profile includes operating equipment to remove snow from streets, roads and parking lots.

BrightView's fiscal 2025 annual report describes the cycle from the employer side: heavier mulching, planting and mowing in spring, leaf removal and cleanup in fall, and snow removal in winter.

BrightView also says its employment peaks in spring and summer.

Municipal plow driving is a separate winter seat, and O*NET's closest match for that job is 47-4051 Highway Maintenance Workers, whose tasks include driving heavy equipment with attachments to remove snow and ice and spread salt and sand.

The seat has a heavy-civil cousin in road, utility and site-development work, running bigger iron on bigger contracts.

The machines overlap; the employers, the sites and the contracts differ.

When you are ready to move, watch the landscaping-only boards.

A company that posts a landscaping job for an operator is hiring for exactly this mix of machine skill, safety judgment and season coverage.

Career information, not legal, tax, insurance or safety advice. Training, certification and CDL questions change with the machine, the state and the employer; confirm with OSHA, FMCSA, your state licensing agencies and the employer.

Frequently Asked Questions

Do you need a CDL to be a landscape equipment operator?

It depends: the CDL attaches to the truck and trailer you drive, not to the machine seat.

Under 49 CFR 383.5, the federal CDL lines sit at 26,001 lb GVWR for a single vehicle, or 26,001 lb GCWR for a combination where the towed unit is over 10,000 lb GVWR.

FMCSA's drug and alcohol testing rules apply to drivers operating commercial motor vehicles subject to CDL requirements.

Confirm your exact truck-and-trailer combination against FMCSA's rules and your state driver-licensing agency.

Is landscape equipment operator work year-round?

It depends: landscape equipment operator work follows the season, and snow removal is one way operators stay busy in winter.

BLS describes grounds maintenance as mostly full-time work that may run longer hours in spring, summer and fall, and notes that some jobs are seasonal while some workers switch to snow removal in winter.

Machine time follows the installation and maintenance calendar, and BrightView says its employment peaks in spring and summer.

Can you become an equipment operator without experience?

Yes, you can become an equipment operator without experience by starting with a crew laborer job: learn the sites and the safety rules, take supervised seat time on the low-stakes machine work, and build from there.

OSHA's construction rules require employers to instruct each employee in recognizing and avoiding unsafe conditions, so ask plainly what training a new operator gets.

List every machine and attachment you can run when you apply.

Related Career Guides

Ready to run the machines? Browse landscape equipment operator jobs →