Texas licenses irrigation work at the state level.
The Texas Commission on Environmental Quality (TCEQ) bars anyone from selling, designing, installing, maintaining, altering, repairing, servicing or inspecting a landscape irrigation system — or consulting in those activities — unless TCEQ has licensed them.
TCEQ lists three landscape irrigation occupational licenses: Landscape Irrigator, Irrigation Technician and Irrigation Inspector.
A separate Backflow Prevention Assembly Tester (BPAT) license covers anyone who tests or repairs backflow prevention assemblies, including on irrigation systems.
The irrigation licenses run three years and renew with continuing-education hours and a $111 fee.
Verify before you rely on this
Texas licenses irrigation work through TCEQ: Landscape Irrigator (LI), Irrigation Technician (IT) and Irrigation Inspector (II).
The Texas Commission on Environmental Quality (TCEQ) issues the irrigation licenses and the BPAT backflow tester license.
TCEQ's Backflow Prevention Assembly Tester (BPAT) license — anyone who tests or repairs backflow prevention assemblies must hold it.
Connecting an irrigation system to the water supply is licensed irrigation work; an Irrigation Technician may install the backflow prevention device under a Landscape Irrigator's supervision.
Not established in our research — ask the city or county and the water supplier.
Three-year irrigation licenses; renewal takes 24 CE hours for Irrigators and Inspectors, 16 for Technicians, plus a $111 fee.
TCEQ's landscape irrigation license, and the license a Texas Irrigation Technician must work under.
May connect a landscape irrigation system to a water supply, including installing a backflow prevention device, and maintain, alter, repair, service or direct installation, under a licensed Landscape Irrigator.
TCEQ's inspection license; a person who owns, consults for or works for an irrigation company may not simultaneously act as an Irrigation Inspector.
TCEQ's license for anyone who tests or repairs backflow prevention assemblies, covering domestic, commercial, industrial and irrigation services.
Each of the three landscape irrigation licenses — Landscape Irrigator, Irrigation Technician and Irrigation Inspector — requires a training course, a criminal history attestation, a $111 fee and a passing score of at least 70 percent on each exam section.
Texas licenses irrigation work at the state level, through the Texas Commission on Environmental Quality (TCEQ).
State rules say a person may not sell, design, install, maintain, alter, repair, service or inspect an irrigation system — or consult in those activities — unless TCEQ has licensed them.
TCEQ lists three landscape irrigation occupational licenses: Landscape Irrigator (LI), Irrigation Technician (IT) and Irrigation Inspector (II).
For a landscape crew, that makes sprinkler selling, design, installation, repair and even consulting licensed work in Texas.
“A person may not sell, design, install, maintain, alter, repair, service or inspect an irrigation system—or consult in these activities—in this state, unless the person is licensed by the TCEQ.”
The three licenses divide the work.
An Irrigation Technician may connect a landscape irrigation system to a water supply, including installing a backflow prevention device, and may maintain, alter, repair, service or direct the installation of a system, but only under the supervision of a licensed Landscape Irrigator.
The Irrigation Inspector license carries a conflict-of-interest rule: a person who owns, consults for or works for an irrigation company may not simultaneously act as an Irrigation Inspector.
All three licenses follow the same path: complete the required training course, apply, submit a criminal history attestation, pay the $111 fee and pass the exam with at least 70 percent on each section.
TCEQ requires no education or work experience for these licenses.
The Landscape Irrigator exam runs about six hours at a computer-based testing center, taken after TCEQ mails an approval letter; processing takes roughly 3-4 weeks.
The connection to the water supply sits inside the irrigation license, not outside it.
Texas rules let an Irrigation Technician connect a landscape irrigation system to a water supply, including installing the backflow prevention device, while working under a licensed Landscape Irrigator.
Our research did not establish separate Texas plumbing-license rules or city and county permit requirements for irrigation connections in the sources we read.
Ask the city or county where the work happens and the water supplier whether a local permit, registration or inspection step applies before you schedule the tie-in.
Backflow testing is its own Texas license, separate from the irrigation licenses.
Anyone who tests or repairs backflow prevention assemblies must hold a TCEQ Backflow Prevention Assembly Tester (BPAT) license, which covers domestic, commercial, industrial and irrigation services.
The irrigation and backflow licenses cover different acts: an Irrigation Technician may install a backflow prevention device while connecting a system, while testing or repairing the backflow prevention assembly itself requires the BPAT.
BPAT applicants need a high school diploma or GED, two years of approved work experience, a 40-hour approved backflow course, a $111 application fee, a written exam at a computer-based testing center and a practical exam given by the training provider.
Installing or repairing lawn irrigation systems counts as approved work experience, so two years of that work can satisfy the BPAT experience requirement.
“A person who repairs or tests the installation or operation of backflow prevention assemblies must hold a license issued by the TCEQ.”
Our research did not establish city or county irrigation licenses, permits or registration rules for Texas in the sources we read.
Local rules can sit on top of the state license, so ask the city or county where a job site sits and the water supplier that serves it before bidding work.
TCEQ irrigation licenses run three years.
Renewal takes 24 continuing-education hours for Landscape Irrigators, 16 hours for Irrigation Technicians and 24 hours for Irrigation Inspectors, plus a $111 renewal fee.
The BPAT license runs on the same three-year cycle: renewal requires 24 hours of continuing education, of which 8 hours must be hands-on practical skills training.
This page summarizes the Texas rules, agency pages and other sources listed below, as read for this state-by-state irrigation license rules series, current as of October 2026. It is not a substitute for the instructions the Texas Commission on Environmental Quality (TCEQ) publishes.
Yes — Texas rules bar a person from selling, designing, installing, maintaining, altering, repairing, servicing or inspecting an irrigation system, or consulting in those activities, unless the Texas Commission on Environmental Quality (TCEQ) has licensed them.
TCEQ's landscape irrigation licenses are Landscape Irrigator, Irrigation Technician and Irrigation Inspector, and an Irrigation Technician may connect a system to a water supply and maintain, alter, repair, service or direct installation only under a licensed Landscape Irrigator's supervision.
A Texas Irrigation Technician may connect a landscape irrigation system to a water supply, including installing a backflow prevention device, but only under the supervision of a licensed Landscape Irrigator.
Testing or repairing the assembly itself is different work: anyone who tests or repairs backflow prevention assemblies must hold TCEQ's separate Backflow Prevention Assembly Tester (BPAT) license.
The TCEQ application fee is $111 for each landscape irrigation license — Landscape Irrigator, Irrigation Technician and Irrigation Inspector — and the renewal fee is $111 as well, every three years.
The Backflow Prevention Assembly Tester application carries the same $111 fee.
Each of the three landscape irrigation licenses also calls for the required training course and an exam with at least 70 percent on each section.
The BPAT instead requires a 40-hour approved course, two years of approved experience, a written exam at a testing center and a practical exam given by the training provider.
About six hours, taken at a computer-based testing center.
Before sitting it, an applicant completes TCEQ's required training course and waits for TCEQ's approval letter, which takes roughly 3-4 weeks to process.
The passing standard is at least 70 percent on each section of the exam.
TCEQ's Backflow Prevention Assembly Tester (BPAT) license requires a high school diploma or GED, two years of approved work experience, a 40-hour approved backflow course, a $111 application fee, a written exam at a testing center and a practical exam from the training provider.
Installing or repairing lawn irrigation systems counts as approved experience.
The license renews every three years with 24 hours of continuing education, 8 of them hands-on.
Sources
Sourced from the documents listed above. Verified October 2026. This is career and employer information, not legal advice. Confirm current rules with the Texas Commission on Environmental Quality (TCEQ).